2 Ton Wheel Loader
The JGM618E is a 2-ton wheel loader designed for material handling in construction and industrial environments. With a rated load of 2,000 kg and a bucket capacity of 1.2 m³, it suits operators managing aggregate, sand, or light demolition debris. The machine weighs 5,240 kg and features a 36.8 kW engine, providing a balance of power and maneuverability for site work.
The loader utilizes a 2,000 mm wide bucket and achieves an unloading height of 3,500 mm. It is equipped with 16/70-20 tires and a split high/low speed torque converter for varied operating speeds. The design includes a minimum ground clearance of 400 mm and a turning radius of 4,500 mm, facilitating operation in confined yards and work zones.
The machine is rated for a 2,000 kg payload. This capacity allows for efficient transport of bulk materials like sand, gravel, and soil without exceeding the structural limits of the frame and hydraulics.
The standard bucket holds 1.2 m³ of material. This volume is suitable for moving loose aggregates and reducing the number of trips required to fill trucks or fillers.
Powered by a 36.8 kW engine, the loader provides sufficient torque for digging and lifting. The power output supports consistent performance during repetitive loading cycles in yard operations.
The split high/low speed torque converter allows operators to switch between travel speeds. This improves fuel efficiency during transport and provides better control during precise positioning.
The loader reaches an unloading height of 3,500 mm. This capability enables direct loading into standard dump trucks and containers without requiring additional lifting equipment.
With a minimum ground clearance of 400 mm, the chassis clears uneven terrain and minor obstacles. This feature helps maintain stability and prevents undercarriage damage on rough job sites.
The minimum turning radius is 4,500 mm measured to the bucket outer edge. This compact turning capability allows the machine to operate in tight spaces such as block yards and narrow construction lanes.
The machine generates a maximum traction force of 55 kN. This ensures the wheels maintain grip on loose surfaces, preventing slippage when the bucket is fully loaded with heavy material.
Ideal for moving sand, gravel, and crushed stone between stockpiles and loading points. The 1.2 m³ bucket and 2-ton capacity streamline the process of filling trucks and managing yard inventory.
Used for clearing debris, moving soil, and loading materials on residential and commercial projects. The compact dimensions and 4,500 mm turning radius allow operation in confined site areas.
Suitable for handling processed rock and aggregate in smaller quarry operations. The 3,500 mm unloading height facilitates loading into transport vehicles without secondary handling.
Effective for moving pallets of blocks and pavers. The stable chassis and 55 kN traction force support safe transport of heavy, dense materials across paved yard surfaces.
Used for shifting bulk materials in small port facilities. The 30 km/h top speed allows for quick transit between storage areas and loading zones within the terminal.
| Parameter | Specification |
|---|---|
| Operating Weight | 5240 kg |
| Rated Load | 2000 kg |
| Bucket Width | 2000 mm |
| Bucket Capacity | 1.2 m³ |
| Dump Height | 3500 mm |
| Dump Reach | 1000 mm |
| Ground Clearance | 400 mm |
| Overall Dimensions (L×W×H) | 6200×2050×3020 mm |
| Wheelbase | 2550 mm |
| Track Width | 1570 mm |
| Min. Turning Radius (Bucket Edge) | 4500 mm |
| Engine Model / Rated Power | Huafeng 36.8kW |
| Tire Size | 16/70-20 |
| Torque Converter | Split high/low speed dual variable |
| Drive Axle | Medium wheel-end axle |
| Max. Speed (km/h) | 30 |
| Total Cycle Time | ≤10 |
| Max. Traction Force | 55 KN |
| Bucket Breakout Force | 65 KN |
Specifications are taken from the manufacturer's data sheet. Configurations and options vary by order and destination market; confirm details with us before purchase.
The JGM618E is a 2-ton wheel loader with a 2,000 kg rated load and 1.2 m³ bucket. It suits operations requiring moderate lifting capacity, such as moving sand, gravel, or demolition debris. The 36.8 kW engine provides the necessary torque for repetitive loading cycles in yard and site environments.
Site access is manageable with a 2,050 mm width and 4,500 mm turning radius. The 3,500 mm unloading height allows loading into standard trucks. Ensure your transport vehicles can accommodate the 6,200 mm length and 5,240 kg operating weight, which fits within standard heavy equipment shipping limits.
The machine features 16/70-20 tires and a 400 mm ground clearance, suitable for prepared surfaces and light off-road conditions. The split high/low speed torque converter supports varied travel speeds. Buyers should verify that the 2,000 mm bucket width matches their material handling requirements.
It is designed for material handling in construction and industrial sites. The 2,000 kg rated load and 1.2 m³ bucket make it suitable for moving sand, gravel, soil, and light demolition debris.
The machine is typically shipped flat-racked or on a heavy equipment trailer. With a length of 6,200 mm and weight of 5,240 kg, it requires standard heavy machinery transport logistics.
No, the 6,200 mm length and 2,050 mm width exceed standard container dimensions. It must be transported on a flatbed or heavy equipment trailer.
Consider ordering bucket teeth, hydraulic hoses, and air filters. The 16/70-20 tires are a common wear item. Specific part numbers should be confirmed with the manufacturer.
The total machine weight is 5,240 kg. This figure is essential for calculating transport logistics and ensuring site ground bearing capacity.
Send us your working conditions and destination port. We will confirm the configuration, shipping method and current availability.
Chat on WhatsApp Email Us
