JGM860M 5 Ton Wheel Loader for Heavy-Duty Material Handling
5 Ton Wheel Loader
Overview
The JGM860M is a 5-ton wheel loader designed for heavy-duty material handling. It features a 162 kW engine and a 3 m³ bucket, providing a rated load of 5000 kg. The machine has an operating weight of 17,800 kg and a maximum traction force of 160 kN. It is suitable for construction, quarry, and port operations where reliable lifting and dumping are required.
The work equipment uses an efficient linkage mechanism to maximize digging force and reduce cycle time. The cab includes a rollover protection structure and a comfortable seat. Serviceability is supported by a central electrical control box, a streamlined rear hood with openable doors, and a centralized lubrication system for easy maintenance.
Key Features
Heavy-Duty Articulated Frame
The frame uses a wide-opening articulated structure with heavy-duty conical roller bearings. This design distributes stress evenly and simplifies maintenance, ensuring the chassis can withstand demanding operating conditions.
Reliable Transmission and Axles
It uses a low-speed heavy-duty transmission and a 50E drive axle with four planetary gears. These components offer high structural strength and load capacity, extending service life and ensuring reliable shifting.
Efficient Hydraulic System
A dual-pump hydraulic system uses large-diameter lines routed directly through the frame. This reduces energy loss and improves power transmission. Hoses use clamp plates and O-rings to minimize leaks and simplify adjustments.
Optimized Bucket Design
The bucket features reinforced structure and a top spill plate to prevent material drop-off. This design increases full-bucket rate, reduces insertion resistance, and extends the life of the rear pin shaft.
Robust Cooling System
The plate-fin air-cooling system uses independent radiators for engine, hydraulic, and transmission oil. This precise heat management keeps temperatures optimal, allowing operation in 45°C high-dust environments.
Enhanced Safety and Visibility
The cab includes a rollover protection structure, reverse video camera, and rear window wiper. These features improve operator safety and visibility during reverse maneuvers and in dusty conditions.
Flexible Attachment Options
The loader supports wood clamps, grass clamps, and side-dump devices. These attachments allow the machine to handle diverse materials beyond standard bucket loading, increasing versatility on the job site.
Where the JGM860M Is Used
Quarry Operations
Ideal for loading crushed stone and aggregate from stockpiles. The high digging force and large bucket capacity allow efficient movement of bulk materials in open-pit mining and stone processing areas.
Construction Sites
Used for moving soil, sand, and debris. The machine’s maneuverability and strong traction support daily earthworks, material transfer, and site cleanup in urban and rural construction projects.
Aggregate Yards
Suited for stacking and loading gravel and sand. The optimized bucket design maintains a high fill rate, reducing the number of cycles needed to load trucks or conveyors in processing plants.
Port Terminals
Applicable for handling bulk cargo and containerized materials. The reliable hydraulic system and robust frame support continuous operation in high-volume loading and unloading tasks at docks.
Block Yards
Used for moving precast concrete blocks and pavers. With appropriate attachments, the loader can handle heavy, dense materials, supporting production and distribution in masonry supply facilities.
Technical Specifications
Parameter
Specification
Operating Weight
17800 kg
Rated Load
5000 kg
Bucket Capacity
3 m³
Dump Height
3100 mm
Dump Reach
1220 mm
Min. Turning Radius (Outside of Tire)
6705 mm
Overall Dimensions (L×W×H)
8250×2990×3540 mm
Wheelbase
3300 mm
Max. Traction Force
≥160 kN
Max. Breakout Force
≥170 kN
Boom Lifting Time
≤5.3 s
Total Cycle Time
≤10 s
Rated Power
162 kW
Travel Speed
Forward gear I
Forward Gear II
0～36 km/h
Reverse Gear I
0～16 km/h
Fuel Tank Capacity
269 L
Hydraulic Tank Capacity
274 L
Specifications are taken from the manufacturer's data sheet. Configurations
and options vary by order and destination market; confirm details with us before purchase.
Standard Equipment
Engine cold start device; oil bath double-layer air filter
The JGM860M handles a rated load of 5,000 kg with a 3 m³ bucket, making it suitable for aggregate, sand, and general construction material. Its 162 kW engine provides the power needed for efficient cycle times in quarry and port environments where consistent material movement is required.
Check site dimensions before ordering. The machine has a minimum turning radius of 6,705 mm and a width of 2,990 mm. These figures are critical for narrow job sites or confined yards. Ensure your access routes and working areas can accommodate these dimensions without restricting operator visibility or movement.
For transport, the unit weighs 17,800 kg and measures 8,250 mm in length. Plan for heavy-duty flatbed transport or break-bulk shipping. The 269 L fuel tank supports extended operation, while the 274 L hydraulic tank ensures stable performance during continuous lifting and dumping cycles.
Daily Operation and Maintenance
Check hydraulic oil levels daily and inspect hoses for leaks or wear, especially around the dual-pump system and large-diameter lines.
Inspect the articulated frame and conical roller bearings weekly for proper lubrication and signs of excessive play or damage.
Verify bucket teeth and the top spill plate for wear to maintain full-bucket rate and prevent material drop-off during loading.
Monitor engine oil and coolant levels before each shift to ensure the 162 kW engine operates within safe temperature ranges.
Frequently Asked Questions
What is the JGM860M primarily used for?
It is designed for heavy-duty material handling in construction, quarry, and port operations. The 5-ton rated load and 3 m³ bucket make it effective for moving sand, gravel, and aggregate over short to medium distances.
How is the machine shipped?
Due to its 17,800 kg weight and 8,250 mm length, it is typically shipped via break-bulk or heavy-lift flatbed. Standard container loading is not feasible without disassembly, which is generally not recommended for this class of equipment.
What is the operating weight of the loader?
The JGM860M has an operating weight of 17,800 kg. This figure is essential for planning site access, ground bearing pressure calculations, and transport logistics when importing the machine.
What attachments are compatible with this model?
The loader is designed for standard buckets, including the 3 m³ unit specified. Other attachments must be verified by the manufacturer to ensure compatibility with the hydraulic system and frame mounting points.
What is the maximum traction force?
The machine provides a maximum traction force of at least 160 kN. This capability supports stable operation on loose surfaces and when pulling heavy loads, contributing to overall job site efficiency.
