The JGM761FT26M is a 26-ton block handler designed for moving heavy stone slabs and blocks. It features a 3,700 mm maximum fork lift height and a 26,000 kg rated load capacity. The machine measures 9,400 mm in length and 3,085 mm in width, with a 30,700 kg operating weight. It is suitable for operators in quarrying, construction, and logistics sectors who require stable, high-capacity material handling.
The machine is equipped with a spacious panoramic cab featuring dust protection, vibration damping, and noise reduction. It includes an intelligent instrument system for real-time monitoring of machine status. The design incorporates a dual-circuit air-over-hydraulic disc brake system and a full hydraulic steering system for reliable operation. The chassis uses finite element analysis for structural integrity, with dust-proof designs at key hinge points to ensure pin lubrication.
Key Features
26-Ton Rated Load Capacity
Handles loads up to 26,000 kg with an 800 mm load center distance. This capacity supports the movement of large stone blocks and heavy construction materials without requiring multiple trips.
High Lift Height
Achieves a 3,700 mm fork face height and 5,170 mm fork carriage height. This allows the operator to load trucks and containers efficiently, reducing the need for additional lifting equipment.
Dual-Pump Hydraulic System
Uses a dual-pump merge system with steering priority. This configuration maintains high work efficiency and low energy consumption, ensuring consistent power delivery to attachments during complex maneuvers.
Full Hydraulic Steering
Features a full hydraulic coaxial flow amplification steering system. This provides light, flexible steering control and reliable operation, reducing operator fatigue during precise positioning tasks in tight spaces.
Three Power Modes
Offers 'Heavy Load,' 'Medium Load,' and 'Light Load' power modes. Operators can select the appropriate mode for specific working conditions to optimize fuel consumption and reduce operational costs.
Robust Braking System
Equipped with dual-circuit air-over-hydraulic disc brakes on all four wheels. The system includes six brake calipers per axle and an air-controlled parking brake for safe stopping in various conditions.
Intelligent Monitoring Instrument
Includes an intelligent instrument system that monitors machine working status in real time. This helps operators track performance and identify potential issues early, supporting preventive maintenance routines.
Durable Structural Design
Structural components are designed using finite element analysis. Key hinge points feature dust-proof designs to maintain pin lubrication, enhancing the machine's reliability and longevity in dusty quarry environments.
Where the JGM761FT26M Is Used
Stone Quarry Operations
Used to lift and move large stone blocks from the cutting face to the processing area. The high load capacity and specialized bucket allow for efficient handling of rough materials, reducing manual labor intensity.
Block Yard Storage
Facilitates the stacking and rearranging of stone blocks in storage yards. The precise steering and high lift height enable operators to organize inventory efficiently and prepare loads for transport.
Construction Site Logistics
Transfers heavy precast elements and stone materials from delivery trucks to the construction site. The stable chassis and strong traction ensure safe movement of loads over uneven terrain.
Port and Terminal Handling
Assists in loading and unloading stone products at port terminals. The machine's dimensions and lift height are suitable for handling standard shipping containers and flatbed trucks.
Aggregate Processing Plants
Moves bulk stone aggregates and processed blocks within the plant area. The durable hydraulic system and robust structure support continuous operation in high-dust environments typical of processing facilities.
Technical Specifications
Parameter
Specification
Overall Length (Forks Flat on Ground)
9400 mm
Overall Width
3085 mm
Overall Height
3730 mm
Load Center Distance
800 mm
Service Weight
30700 kg
Rated Load (at Max. Forward Reach)
26000 kg
Max. Fork Surface Height
3700 mm
Max. Fork Frame Height
5170 mm
Standard Forks (L×W×T)
1500×240×110 mm
Steering Angle (L/R)
35/35 °
Turning Diameter
16430 mm
Ground Clearance
472 mm
Wheelbase
4050 mm
Track Width (Front/Rear)
2370 mm
Departure Angle
23 °
Max. Traction Force
238 kN
Forward I-Low / I-High / II-Low / II-High
6.6/12.3/24/34.6 Km/h
Reverse I-Low / I-High / II-Low / II-High
6.6/12.3/24/34.6
Fork Tilt Angle at Max. Lift (F/R)
22.5/39 °
Bucket Rollback Angle (Ground Position)
21 °
Oscillation Angle (L/R)
10/10 °
System Pressure
21 MPa
Total Cycle Time
18.2 s
Specifications are taken from the manufacturer's data sheet. Configurations
and options vary by order and destination market; confirm details with us before purchase.
Standard Equipment
Full hydraulic braking, dedicated bucket, tire protection chain, single cooling/heating-cooling air conditioning
Electronically controlled high-pressure common rail engine, hydraulic transmission assembly, self-made 60 drive axle (three brake calipers per side), cab equipped with sunshade, coil mat, heater, etc., new aluminum radiator with intercooler, torque converter oil cooler, hydraulic oil cooler, new waterproof connector wiring harness, intelligent instrument panel, whole machine equipped with fuel sensor, GPS
How to Choose the Right Configuration
Verify your site layout supports a 16,430 mm turning diameter and 3,085 mm machine width. The JGM761FT26M requires adequate space for maneuvering, especially in tight quarry or yard environments. Ensure your access roads and gate widths accommodate the 9,400 mm overall length when forks are lowered.
Match the 26,000 kg rated load to your typical block weight. With an 800 mm load center, this machine handles heavy stone slabs efficiently. Check that your truck bed heights align with the 3,700 mm maximum fork face height to minimize repositioning time during loading operations.
Consider the 30,700 kg operating weight for transport planning. The machine’s 4,050 mm wheelbase and 2,370 mm front track width provide stability on uneven terrain. Confirm your local road weight limits and bridge capacities can support this weight during transit to the job site.
Daily Operation and Maintenance
Check hydraulic oil levels and inspect hoses for leaks daily, as the 21 MPa system pressure requires consistent fluid integrity for safe operation.
Inspect the 1,500 mm standard forks for wear and cracks, ensuring they remain aligned to prevent uneven load distribution during lifts.
Monitor tire pressure and tread depth weekly, noting the 2,370 mm front track width to maintain stable steering and braking performance.
Lubricate all hinge points and pins regularly to prevent dust ingress, which can compromise the structural integrity of the chassis.
Frequently Asked Questions
What is the primary use of the JGM761FT26M?
It is designed for moving heavy stone slabs and blocks in quarrying, construction, and logistics. The 26-ton capacity and high lift height make it suitable for loading trucks and containers with large, dense materials.
How is this machine shipped from China?
The machine is typically shipped on a flatbed or heavy-lift container. Given the 9,400 mm length and 3,085 mm width, it requires specialized logistics planning. Forks are usually lowered to reduce overall height for transport safety.
Can it fit in a standard shipping container?
No, the 9,400 mm length and 3,085 mm width exceed standard container dimensions. It must be shipped on a flat rack or open-top container, requiring careful weight distribution and securement.
What spare parts should I stock initially?
Stock standard 1,500 x 240 x 110 mm forks, hydraulic filters, and brake pads. These components experience regular wear and are critical for maintaining the 26-ton load capacity and safe operation.
What is the operating weight of the machine?
The operating weight is 30,700 kg. This figure is essential for planning site access, road transport permits, and ensuring ground bearing capacity at the job site to prevent sinking or damage.
