Daily Operation and Maintenance
- Inspect the 21 MPa hydraulic system for leaks at the mast and cylinder seals daily to maintain pressure integrity.
JGM781FT35M 35 Ton Heavy Duty Block Handler
35 Ton Block Handler
Overview
The JGM781FT35M is a 35-ton block handler designed for heavy material handling in industrial and construction environments. It features a rated load of 35,000 kg and a total operating weight of 38,300 kg. The machine has a compact width of 3,185 mm and a turning diameter of 18,410 mm, allowing it to operate in constrained yard spaces. Its dimensions are optimized for transporting large, heavy blocks and precast elements.
The handler is equipped with a mast system that provides a maximum fork height of 3,500 mm and a fork carriage height of 4,480 mm. It offers a fork tilt range of 45 degrees forward and 23.5 degrees backward at ground level. The vehicle uses a four-speed transmission with speeds up to 30 km/h. The design includes a 21 MPa hydraulic system and a 20-degree maximum climbing grade, supporting stable operation on uneven terrain.
Key Features
35-Ton Rated Load Capacity
Rated for 35,000 kg at maximum overhang, this machine handles heavy precast blocks and large structural components. The 38,300 kg operating weight provides the stability required for safe lifting and transport of dense materials.
Compact Turning Diameter
With a turning diameter of 18,410 mm and a 33-degree steering angle, the handler maneuvers efficiently in tight block yards. This reduces the space required for turning compared to larger articulated vehicles.
High Fork Tilt Range
The forks tilt 45 degrees forward and 23.5 degrees backward when the boom is extended. This range allows operators to adjust the load angle for secure placement and retrieval from racks or trailers.
Multi-Speed Transmission
The vehicle offers four forward and four reverse speeds, ranging from 6.2 km/h to 30 km/h. This allows for precise low-speed control during loading and faster transit between work areas.
21 MPa Hydraulic System
The 21 MPa system pressure supports the lifting and tilting functions required for 35-ton loads. This ensures consistent performance during repeated lifting cycles in high-volume production environments.
20-Degree Climbing Grade
The handler can climb a 20-degree slope while fully loaded. This capability is useful for accessing elevated loading areas or navigating graded slopes within aggregate yards and construction sites.
Standard Fork Dimensions
The standard forks measure 1,700 mm in length, 250 mm in width, and 140 mm in height. These dimensions are designed to fit standard block and precast element sizes commonly used in industrial construction.
Where the JGM781FT35M Is Used
Precast Concrete Yards
Used to stack, move, and load precast concrete blocks and panels. The 35-ton capacity handles large structural elements, while the tilt function ensures secure placement on storage racks or transport trailers.
Quarry Operations
Suitable for moving heavy stone blocks from cutting areas to processing lines. The machine’s climbing grade and stable chassis support operation on the uneven ground typical of active quarry sites.
Construction Sites
Transfers large foundation blocks and wall panels within active construction zones. The compact width allows navigation through site access roads, while the multi-speed transmission aids in precise positioning.
Port and Terminal Handling
Assists in loading and unloading heavy block cargo from ships or trucks. The high fork height and tilt range facilitate efficient transfer between ground level and container or trailer decks.
Aggregate and Block Production
Moves finished blocks from production lines to storage areas. The 35-ton capacity reduces the number of trips required, improving throughput in high-volume manufacturing facilities.
Technical Specifications
| Parameter | Specification |
|---|---|
| Overall Length (Forks Flat on Ground) | 9865 mm |
| Overall Width | 3185 mm |
| Overall Height | 3720 mm |
| Load Center Distance | 900 mm |
| Service Weight | 38300 kg |
| Rated Load (at Max. Forward Reach) | 35000 kg |
| Max. Fork Surface Height | 3500 mm |
| Max. Fork Frame Height | 4480 mm |
| Max. Forward Reach | 3490 mm |
| Fork Tilt Angle (Boom Horizontal, F/R) | 45/23.5 ° |
| Standard Forks (L×W×H) | 1700×250×140 mm |
| Steering Angle (L/R) | 33/33 ° |
| Turning Diameter | 18410 mm |
| Ground Clearance | 430 mm |
| Wheelbase | 4400 mm |
| Track Width (Front/Rear) | 2510 mm |
| Front Overhang (Forks Flat on Ground) | 3000 mm |
| Rear Overhang | 2400 mm |
| Max. Gradeability (Loaded) | 20 ° |
| Departure Angle | 21 ° |
| Max. Traction Force | 270 kN |
| Travel Speed | 6.2/10.8/20/30 km/h |
| Reverse Gear I/II/III/IV | 6.2/10.8/20/30 |
| Fork Tilt Angle at Max. Lift (F/R) | 24/28 ° |
| Bucket Rollback Angle (Ground Position) | 20 ° |
| Oscillation Angle (L/R) | 10 ° |
| System Pressure | 21 MPa |
| Ground Clearance of Boom Lower Pivot at Max. Lift Height | 3980 mm |
| Articulation Point to Front Axle Center | 2360 mm |
| Max. Main Frame Length | 7750 mm |
| Max. Fork Frame Height at Max. Lift (Rolled Back) | 4815 mm |
| Total Cycle Time | 10.5/2.7/7.2/20.4 |
Specifications are taken from the manufacturer's data sheet. Configurations and options vary by order and destination market; confirm details with us before purchase.
How to Choose the Right Configuration
Verify that your site layout accommodates the 18,410 mm turning diameter and 3,185 mm width. The JGM781FT35M is designed for tight block yards, but you must ensure clearance for the 9,865 mm overall length when forks are lowered. Check that your storage racks allow for the 3,500 mm maximum fork height to ensure efficient loading and unloading cycles.
Confirm your material density and size fit the 35,000 kg rated load with a 900 mm load center. The 3,490 mm maximum overhang determines how far the load extends beyond the front axle. Ensure your transport trailers match the 1,700 mm standard fork length and that the 21 MPa hydraulic system pressure supports your specific attachment requirements for secure handling.
Assess your terrain for the 20-degree maximum climbing grade and 430 mm ground clearance. The 38,300 kg operating weight provides stability, but you must plan for the 2,400 mm rear overhang during transport. Verify that your local road regulations permit the 30 km/h top speed and that the 270 kN traction force is sufficient for your specific site conditions and slope requirements.
Frequently Asked Questions
What is the primary application for this machine?
The JGM781FT35M is designed for handling heavy precast concrete blocks and large structural elements. It is suitable for block yards, precast plants, and construction sites where 35-ton loads require precise placement and transport.
How is the machine shipped?
The machine is typically shipped as a complete unit on a flatbed or heavy-duty trailer. Due to its 38,300 kg operating weight and 9,865 mm length, it requires specialized heavy transport logistics. Forks are usually lowered to minimize height during transit.
What are the standard fork dimensions?
The standard forks measure 1,700 mm in length, 250 mm in width, and 140 mm in height. These dimensions are designed to fit standard precast block racks and trailers. Custom fork lengths may be required for specific site layouts.
What is the turning radius in tight spaces?
The turning diameter is 18,410 mm. This compact radius allows the handler to maneuver in constrained block yards. The 33-degree steering angle on both sides contributes to this agility, reducing the space needed for reversing and positioning.
Can it operate on uneven terrain?
Yes, the machine has a maximum climbing grade of 20 degrees and a minimum ground clearance of 430 mm. The 270 kN traction force helps maintain stability on slopes. However, operators should assess site conditions to ensure the 430 mm clearance is sufficient for specific obstacles.
Interested in the JGM781FT35M?
Send us your working conditions and destination port. We will confirm the configuration, shipping method and current availability.
Chat on WhatsApp Email UsRelated Block Handlers
