JGM761FT23M 23 Ton Block Handler for Heavy Material
23 Ton Block Handler
Overview
The JGM761FT23M is a 23-ton block handler designed for heavy material handling in demanding industrial environments. With an overall length of 8970 mm and a width of 2950 mm, it balances maneuverability with substantial lifting capacity. The machine features a rated load of 23,000 kg and a maximum fork height of 3460 mm, making it suitable for stacking large blocks and aggregates in yards and construction sites.
The equipment includes standard forks measuring 1700 mm in length and 200 mm in width. The hydraulic system operates at a pressure of 23 MPa, supporting a maximum traction force of 183 kN. The design incorporates a turning diameter of 15060 mm and a minimum ground clearance of 375 mm, allowing operation on uneven surfaces typical of block yards and quarry sites.
Key Features
23 Ton Rated Load Capacity
The machine handles a rated load of 23,000 kg at maximum front overhang. This capacity supports the movement of heavy concrete blocks and large aggregate loads without requiring multiple trips.
3460 mm Maximum Fork Height
The maximum fork face height reaches 3460 mm, while the fork carriage height is 4218 mm. This range allows efficient loading into standard trucks and stacking blocks to moderate heights.
Compact Fork Dimensions
Standard forks measure 1700 mm in length, 200 mm in width, and 120 mm in height. These dimensions provide sufficient reach for most block sizes while maintaining stability during transport.
183 kN Maximum Traction
The machine generates a maximum traction force of 183 kN. This ensures reliable movement of fully loaded attachments on loose or uneven ground common in quarry and yard environments.
23 MPa Hydraulic System
The hydraulic system operates at a pressure of 23 MPa. This pressure level supports consistent lifting and tilting performance under full load conditions during daily operations.
35 Degree Steering Angle
The steering angle reaches 35 degrees left or right. Combined with a turning diameter of 15060 mm, this geometry facilitates navigation within confined block storage areas and loading bays.
375 mm Ground Clearance
The minimum ground clearance is 375 mm. This clearance helps the machine traverse rough terrain and uneven surfaces without damaging the undercarriage or chassis components.
Where the JGM761FT23M Is Used
Concrete Block Yards
Used for stacking, moving, and loading precast concrete blocks. The 23-ton capacity and 3460 mm lift height accommodate standard block sizes and pallet configurations efficiently.
Quarry Operations
Handles large stone blocks and aggregate loads in open-pit or surface quarries. The 375 mm ground clearance and 183 kN traction support operation on rough, unpaved surfaces.
Construction Sites
Transfers heavy materials such as foundation blocks and masonry units. The 1700 mm fork length provides adequate reach for standard transport vehicles and site storage areas.
Port and Terminal Handling
Moves heavy cargo units and block loads in port environments. The 23,000 kg rated load supports efficient transfer between storage areas and shipping containers or trucks.
Aggregate Processing Plants
Transports bulk material containers and heavy blocks within processing facilities. The 23 MPa hydraulic system ensures reliable lifting performance during continuous shift operations.
Technical Specifications
Parameter
Specification
Overall Length (Forks Flat on Ground)
8970 mm
Overall Width
2950 mm
Overall Height
3577 mm
Load Center Distance
800 mm
Service Weight
26800 kg
Rated Load (at Max. Forward Reach)
23000 kg
Max. Fork Surface Height
3460 mm
Max. Fork Frame Height
4218 mm
Standard Forks (L×W×H)
1700×200×120 mm
Steering Angle (L/R)
35 °
Turning Diameter
15060 mm
Ground Clearance
375 mm
Wheelbase
3700 mm
Track Width (Front/Rear)
2310 mm
Front Overhang (Forks Flat on Ground)
2680 mm
Rear Overhang
2344 mm
Departure Angle
20 °
Max. Traction Force
183 kN
Travel Speed
32/10.5 km/h
Reverse Gear I
13.8
Fork Tilt Angle at Max. Lift (F/R)
33/27 °
Bucket Rollback Angle (Ground Position)
19 (20251009 modified)
Oscillation Angle (L/R)
10 °
System Pressure
23 MPa
Ground Clearance of Boom Lower Pivot at Max. Lift Height
3765 mm
Articulation Point to Front Axle Center
1865 mm
Max. Main Frame Length
6890 mm
Max. Fork Frame Height at Max. Lift (Rolled Back)
4523 mm
Dump Height and Dump Reach at Max. Lift
2680/2473 mm
Bucket Rollback Angle (Boom Horizontal)
30 °
Dump Angle (Boom Horizontal)
43 °
Specifications are taken from the manufacturer's data sheet. Configurations
and options vary by order and destination market; confirm details with us before purchase.
How to Choose the Right Configuration
Verify that your site layout accommodates the machine's 15060 mm turning diameter and 2950 mm width. If you operate in tight block yards, ensure aisles are wide enough to prevent collisions. The 35-degree steering angle helps, but the large turning radius requires careful planning for efficient daily operations.
Confirm your load requirements align with the 23,000 kg rated load at maximum front overhang. The 800 mm load center distance is standard for heavy blocks. If your blocks are wider or heavier, check if the 1700 mm standard forks provide enough reach and stability for your specific material dimensions.
For transport, note the 26,800 kg operating weight and 8970 mm overall length. These dimensions fit within standard 40 ft container limits for sea freight. Ensure your receiving port and inland transport routes can handle this weight and height, particularly the 3577 mm overall height when forks are lowered.
Daily Operation and Maintenance
Check hydraulic fluid levels and inspect hoses for leaks daily, as the 23 MPa system pressure requires consistent integrity to maintain 183 kN traction force.
Inspect the 1700 mm standard forks for wear, cracks, or bending at the tips and roots before each shift to prevent load failure.
Monitor tire pressure and tread depth weekly, ensuring the 2310 mm front wheel track remains stable on uneven quarry surfaces.
Clean dust and debris from the operator cab and engine compartment regularly to prevent overheating in dusty block yard environments.
Frequently Asked Questions
What is the JGM761FT23M primarily used for?
It is designed for handling heavy concrete blocks and aggregates. With a 23,000 kg rated load and 3460 mm fork height, it stacks and loads large blocks in yards, quarries, and construction sites efficiently.
How is this machine shipped from China?
The machine is typically shipped in a 40 ft container. Its 8970 mm length and 2950 mm width fit standard container dimensions. The 26,800 kg operating weight is within the payload limit of a standard 40 ft container.
What is the operating weight of the JGM761FT23M?
The operating weight is 26,800 kg. This figure is critical for calculating transport logistics, ensuring that trucks and cranes at the destination can safely handle the machine during offloading.
Are the standard forks compatible with other attachments?
The standard forks measure 1700 mm in length and 200 mm in width. While the machine supports the specified fork dimensions, compatibility with other attachments depends on the mounting interface, which is not detailed in the provided specifications.
What is the minimum ground clearance?
The minimum ground clearance is 375 mm. This allows the machine to operate on uneven surfaces typical of block yards and quarry sites without the undercarriage contacting the ground.
